⟐ Commented luglio 17, 2026 at 11:33 GMT-7

⟐ Answered maggio 26, 2026 at 1:04 GMT-7

⟐ Edited by author marzo 24, 2026 at 7:44 GMT-7

⟐ Answered gennaio 28, 2026 at 4:35 GMT-7

Thanks

⟐ Edited by author ottobre 17, 2025 at 0:49 GMT-7

⟐ Answer edited agosto 18, 2025 at 2:31 GMT-7

⟐ Answered aprile 16, 2021 at 8:34 GMT-7

google translate

Repair electrical board electrolux rex

I would Salere how to repair a circuit board washing machine electrolux rex

⟐ Edited ottobre 28, 2015 at 10:43 GMT-7

The labels on the machine say: Ultimate care II, imperial Series, quiet wash, commercial quality, super capacity plus, 10 cycles, 3 speed motor, 6 speed combinations, porcelain basket.

LSN1000LW0

Washer recently started doing this thing where if agitates briefly then stops. The timer carries on through the cycle. It fills and spins fine. I did the unplug it technique a few times but never to could get it to agitate much longer than 30 seconds at a time in any cycle except for in the extra low agitation cycle ( Delicates)

I have spent some more time observing this machine. My washer says it has 3 motor speeds. Low, high, and extra low agitation and low and high spin are named features of this washer.

4 cycle choices on the dial 1.) normal,-(superwash, heavy, regular, light)-High&low agitation, high spin,

2.) Hand washable- intermittent agitation, low spin,

3.) Extra delicates-extra low agitation.

4.) Casual Permanent press, high& low agitation, low spin

So I Ioaded it lightly and watched it do an entire cycle on each of the 4 cycle settings without interfering.

Normal-It fills, agitates on high, pauses, agitates more, pauses (as if low agitation is skipped?). Timer continues to advance. It goes through this for the entire cycle. It then Spins. Fills for rinse and does the same routine on rinse cycle as during wash cycle. Agitate, pause, agitate, pause. So I started to think about how 3 speed motor operation might be a factor.

I switched to a cycle that says intermittent agitation.( Delicates,) And this cycle seems to work fine. ( Delicate pattern is Agitate, soak( pause) , agitate, soak.

Extra delicate cycle-extra low agitation. This cycle works fine. Yay! At least I can wash light loads on this cycle.

Ok so I'm starting to agree that the circuit that activates agitation levels is suspect.

But now there is more:

The washer tripped the breaker today in the middle of the extra delicate cycle. Pfft.

My family wants me to throw the thing away. I want to fix it.

Edit July 24

I tried to wash a extra light load. It fills and spins but no agitation on any cycle now.The motor hums and timer advances but no agitation at all on any cycle.

I needed a socket wrench extension to get bolt off agitator mechanism. I got one today. Indeed the agitator the dogs are toast. That explains a few things. But the lower agitator worked independently from the upper one previously. So I carried on with lower agitator diagnostics since I already had it taken apart

I found the agitator spline situation to be fine. So I'm moved to test agitator shaft function. I filled washer and observed the shaft. It no longer moves at all. But the machine does still fill and spin.

Does this indicate anything different?

I have ordered some of the contact cleaner stuff delivered. Local hardware store in my town did not have any.

But I'm starting suspect a transmission problem now. But I plan to check the motor coupling as well. ( I have already changed this part once about 5 years ago) Any insight would be appreciated.

Edit July 25

Contact cleaner spray was found and applied to the timer mechanism as suggested. No change in above mentioned situation.

Thanks, Dee

⟐ Commented luglio 25, 2026 at 18:11 GMT-7

⟐ Commented luglio 22, 2026 at 10:36 GMT-7